A flow restrictor is a very useful tool. It is built into your bathroom faucet. Using a flow restrictor provides you a limitation of the water consumption and to save money. The reduced water flow helps the environment and your water bill and it regulates the water pressure. However, sometimes your flow restrictor needs to be cleaned and replaced. If you have low water pressure, you need to remove the flow restrictor. You don’t need to worry about that because, in this read, we will talk about how to remove flow restrictor from bathroom faucet. It is easy to remove a flow restrictor thanks to some practical steps.
How to Remove Flow Restrictor from Bathroom Faucet: Identify the Type of the Flow Restrictor
The first thing about how to remove flow restrictor from bathroom faucet is to determine the type of the flow restrictor. Whereas some bathroom faucets have their flow restrictor that is installed inside an aerator, some models have a single flow restrictor that is separated from the aerator. Today, we will explain how to remove it on both models.
Single Flow Restrictor
If you have a single flow restrictor, firstly, you need to twist the faucet head with an adjustable wrench. In case the flow restrictor might be damaged, you need to attach a rubber band to the flow restrictor. After you remove the flow restrictor, you need to clean it if you see build-up on the flow restrictor.
Flow Restrictor in the Aerator
If you are wondering about how to remove flow restrictor from bathroom faucet, keep reading. Removing the flow restrictor inside the aerator is a bit more difficult. If you follow the steps mentioned below, it will be easy for you.
Step 1: Block the Drain
The first thing you need to do is block your sink drain because the small pieces might fall into the sink.
Step 2: Unscrew the Aerator
An aerator is usually positioned on the end at the faucet. You need to use an adjustable wrench to remove the aerator. If you put a rubber band on the aerator, you can prevent any damage.
Step 3: Remove the Flow Restrictor
This is the last step about how to remove flow restrictor from bathroom faucet. After checking the aerator, you need to remove the restrictor with a screwdriver. Finally, now you can screw the aerator back on the faucet and check the water pressure if it is better or not.
A flow restrictor is a convenient tool that is able to limit the use of water and regulates the water pressure, so it can save water and money. However, if you have low water pressure, you can remove the flow restrictor in order to fix this problem. This process is not as hard as you might think. If you follow the instructions that we mentioned above, you can easily remove a flow restrictor. We hope that this article has guided you through everything that you need to know about how to remove flow restrictor from bathroom faucet.